Estro Systems
Estro Systems di Larrabetzu
mechanical presses and automations
Sig. Miguel Angel Lopez Garcia
Ugalde Auzoa 8
48195 Larrabetzu
Spagna
Offerte attuali di rivenditori simili
Annuncio economico
Willich
1.139 km
Pressa idraulica
MÜLLERHSP 100E
MÜLLERHSP 100E
Chiama
Condizione: usata, Anno di produzione: 1984, Pressione: 1000 t
Itsdpfx Asyacpaodpob
Corsa: 200 mm
Fabbisogno totale di potenza: 30 kW
Peso macchina ca. 8 t
Sono disponibili diverse immagini
Annuncio economico
Hilchenbach
1.069 km
Pressa idraulica
EXNEREX 160
EXNEREX 160
Chiama
Condizione: pronta per il funzionamento (usata), Anno di produzione: 1983, Funzionalità: perfettamente funzionante, Pressa idraulica
Produttore: EXNER
Modello: EX 160 SB
Itedpfx Adex U Uccepob
Forza massima: 160 tonnellate
Potenza installata: 38 kW
Dimensioni tavola: 870 x 700 mm
Altezza d’installazione: 500 mm
Corsa max.: 300 mm
Annuncio economico
Germania
1.047 km
Pressa idraulica a quattro colonne
OTT300K300-50
OTT300K300-50
Chiama
Condizione: buona (usata), Anno di produzione: 1981, Pressione: 300 t
Larghezza libera: 1100 mm
Corsa: 950 mm
Larghezza tavola: 1050 mm
Profondità tavola: 1200 mm
Altezza di installazione: 1180 mm
Peso macchina ca.: 20 t
Ingombro ca.: 2,8 x 3 x 4,5 m
Questa pressa idraulica a 4 colonne OTT è in buone condizioni ed è disponibile da subito.
Varie:
Barriera fotoelettrica, carenatura
Itsdpfx Adsx Uru Nopjb
Documentazione elettrica completa
Schema di foratura sul tavolo M20 / passo 135 mm
Annuncio economico
Eilenburg
1.067 km
Pressa idraulica
ALIKO12800 x 3000 to
ALIKO12800 x 3000 to
Chiama
Condizione: buona (usata), Anno di produzione: 1990, altezza totale: 7.200 mm, larghezza totale: 4.200 mm, lunghezza totale: 14.500 mm, profondità della gola: 700 mm, Lunghezza di piegatura: 14000 mm
Larghezza del supporto: 10500 mm
Controllo: CYBELECCNC 7000 m. Grafica
Larghezza del tavolo: 1000 mm
Distanza tavola - trave pressa min./max.: 1800 mm
assi controllati: Y1; Anno 2; X1; X2
Il sistema di controllo è stato rinnovato nel 2012
Potenza totale richiesta: 75 kW
Peso della macchina circa minimo: 465 t
Spazio richiesto circa: 14600 x 4200 x 7200 mm
Informazioni aggiuntive
- Distanza tra il tavolo e la trave della pressa: 1800 mm
Itodpsx T Akxjfx Adpjb
Annuncio economico
Koglhof
653 km
Pressa idraulica
HYDRAP PRESSENHPSK80
HYDRAP PRESSENHPSK80
Chiama
Condizione: usata, Anno di produzione: 1994, ore di funzionamento: 27.436 h, Funzionalità: non collaudato, numero macchina/veicolo: 6915, forza di pressatura: 80 t, larghezza tavola: 500 mm, lunghezza del tavolo: 700 mm, peso complessivo: 6.500 kg, larghezza della piastra del cilindro: 400 mm, lunghezza della piastra di spinta: 500 mm, distanza dalla tavola alla ram: 500 mm, corsa: 300 mm, capacità serbatoio olio: 485 l, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, Offriamo questa pressa idraulica usata HYDRAP PRESSEN HPSK80, anno di costruzione 1994.
Produttore: HYDRAP PRESSEN
Modello: HPSK80
Anno di costruzione: 1994
Condizione: usata
ID categoria: 1330
ID tipo: 1231
Tipo di macchina: pressa idraulica
Se avete domande o necessitate di ulteriori informazioni, non esitate a scriverci o a contattarci telefonicamente.
Itsdpfjx Ti Auex Adpob
Annuncio economico
Lüdenscheid
1.106 km
Pressa idraulica
RÖCHER ( SCHÖN )S.H.C. -160
RÖCHER ( SCHÖN )S.H.C. -160
Chiama
Condizione: eccellente (usata), Funzionalità: perfettamente funzionante, RÖCHER ricostruzione 1991 (ex SCHÖN)
Forza di pressione 1.600 kN
Iodpfx Aox Sw Iiodpetb
Corsa slitta 160 mm
Dimensioni tavola 850 x 650 mm
Controllo tramite barriera fotoelettrica
Prossima verifica obbligatoria: febbraio 26
Serratura a perno sulla slitta
Velocità di avanzamento rapido 274 mm/s
Velocità di lavoro 20/10 mm/s
Velocità di ritorno 273 mm/s
Potenza motore 30 kW
Tensione di esercizio 380 Volt/50 Hz
Protezione massima 100 A
Annuncio economico
Darwen
1.724 km
Pressa Bruderer BSTA30. Capacità 30 tonnellate, display digitale.
BRUDERERBSTA30
BRUDERERBSTA30
Chiama
Condizione: usata, Pressa Bruderer BSTA30. Capacità 30 tonnellate, display digitale. Gamma variabile 100-600 giri/min. Regolazione corsa 8-40 mm. Regolazione martello 40 mm. Motore di azionamento 5,5 kW. Larghezza massima materiale 120 mm. Spessore massimo materiale 3 mm.
Itodpfox Sr Nbox Adpsb
Annuncio economico
Trittau
1.318 km
Pressa idraulica a due colonne
NETSTAL
NETSTAL
Chiama
Condizione: usata, Anno di produzione: 1950, Pressione: 120 t
Forza di ritorno: 20 t
Corsa del pistone: 500 mm
Altezza di installazione: 600 mm
Dimensioni utili del tavolo: 800 x 800 mm
Secondo la nostra valutazione, la macchina si trova in buone condizioni usate e può essere visionata sotto tensione previo appuntamento.
Iedpfx Ajx Sr Evedpjtb
Accessori, utensili e dispositivi di serraggio mostrati nelle immagini sono inclusi nella fornitura solo se specificato nelle informazioni aggiuntive.
Modifiche e errori nei dati tecnici e nelle informazioni, nonché la vendita anticipata, sono riservati!
Annuncio economico
Ciriè
547 km
Pressa idraulica
MURAROID500/250
MURAROID500/250
Chiama
Condizione: eccellente (usata), Funzionalità: perfettamente funzionante, Produttore MURARO
Ijdex R U R Eopfx Adpjtb
Modello ID500/250
Anno 2001
Condizione Usato
Numero di magazzino Cod. 0114
Pressione massima slitta superiore 500 ton.
Corsa della slitta 900 mm.
Luce verticale massima 1.500 mm.
Dimensione Tavola 2.700 x 1.600.
Dimensioni slitta 2.700 x 1.600mm.
Dimensione tavola premilamiera 2.450 X 1.250 mm.
Velocità di avvicinamento slitta mm/sec 650 avvicinamento
Cuscino premilamiera - forza totale (ton) 250 ton.
Corsa premilamiera inferiore 400 mm.
Altezza da terra pressa 5.600 mm
Clickout
Uhingen
796 km
Pressa da disegno a doppia colonna
MüllerBZE1600-35.2.1
MüllerBZE1600-35.2.1
Condizione: usata, Anno di produzione: 1965, Marca: MÜLLER, Modello: BZE1600-35.2.1, Anno di costruzione: 1965, N. di serie: 902, Pressione max.: 1.600 t (slitta 1.000 t + pressore lamiera 600 t; combinabili), tavola scorrevole, 3.500 x 2.750 mm, superficie di serraggio slitta 3.500 x 2.750 mm, corsa slitta 1.400 mm, regolazione slitta 350 mm, pressione cuscino di estrazione tavola 36 - 360 t, corsa cuscino di estrazione tavola 250 mm, bloccaggio idraulico dell’utensile sulla slitta, comando pressa, prod. Siemens, tipo Simatic S7, pannello operatore, tipo Simatic OP37
Itsdpfx Aex Rzkxedpjb
+++ Attenzione: la macchina fa parte di un'asta online! +++
Clickout
Uhingen
796 km
Pressa da disegno a doppia colonna
HYDRAPHPDZ b 1600
HYDRAPHPDZ b 1600
Condizione: usata, Anno di produzione: 1994, Marca: HYDRAP, modello: HPDZ b 1600, anno di costruzione: 1994, N. di serie: 6784, pressione max.: 1.600 t (cilindro 1.000 t + pressalamiera 600 t, collegabili), tavola scorrevole 3.600 x 2.200 mm, superficie di fissaggio cilindro 3.620 x 2.200 mm, corsa cilindro 1.500 mm, pressione cuscino estrattore tavola 36 - 360 t, corsa cuscino estrattore tavola 450 mm, controllo pressa, consolle di comando orientabile, robot lineare Strothmann
Ijdpfx Aex Ry Tfedpotb
+++ Attenzione: La macchina fa parte di un'asta online! +++
Annuncio economico
Marl
1.166 km
Pressa idraulica
Hans SchoenNH/LF200
Hans SchoenNH/LF200
Chiama
Condizione: pronta per il funzionamento (usata), Anno di produzione: 1987, Funzionalità: perfettamente funzionante, forza di pressatura: 200 t, Hans Schoen NH/LF 200 (UVV) – potente e robusta
🔧 Modello: Hans Schoen NH/LF 200
📍 Tipo: Pressa idraulica a doppio montante (certificata UVV)
📅 Anno di costruzione: ca. 1988 (variabile a seconda della macchina)
📦 Condizioni: usata, pienamente funzionante
⸻
💪 Caratteristiche tecniche principali
• Forza di pressatura: ca. 200 t – adatta per lavorazioni di formatura e trafilatura impegnative
• Azionamento idraulico per un controllo preciso della forza e della corsa
• Distanza tra montanti: ca. 1.050 mm – ampia zona di lavoro
• Corsa: ca. 150 mm – movimenti efficienti
• Superficie tavola: ca. 1.000 × 1.200 mm – grande area di bloccaggio
• Altezza tavola dal suolo: ca. 850 mm – altezza di lavoro ergonomica
• Comando idraulico (spesso con PLC/controllo Siemens) disponibile
• Sicurezza e omologazione UVV per lavori di inserimento manuale – maggiore sicurezza in azienda
💡 Grazie alla costruzione robusta, questa pressa è ideale per la produzione in serie, processi di trafilatura e formatura, nonché per lavorazioni e assemblaggi nei reparti di lavorazione metalli.
⸻
📌 Caratteristiche e dotazione
• Comando a due mani / controllo di sicurezza
• Battuta fissa regolabile
• Spegnimento pressione
• Pressostato
• Misure di protezione conformi UVV
→ tutto per lavorare in modo efficiente e sicuro nell’officina
Attualmente sottoposta a collaudo UVV.
⸻
🛠️ Ambiti di impiego
Questa pressa è estremamente versatile, adatta ad esempio per:
Itedpfxsx Ry Nyo Adpsb
• Imbutitura e formatura dei metalli
• Assemblaggio e produzione di componenti di montaggio
• Processi di test e controllo qualità
• Produzione in serie e piccola serie
⸻
📦 Dimensioni e peso
• Dimensioni (ca.): larghezza × profondità × altezza ≈ 4,0 × 3,6 × 3,4 m
• Peso: ca. 16 t – robusta costruzione industriale
Clickout
Uhingen
796 km
Pressa idraulica a doppia colonna
Schuler SMGHZPU-T 1000-2500/2100
Schuler SMGHZPU-T 1000-2500/2100
Condizione: usata, Anno di produzione: 2001, Marca: SCHULER SMG, Modello: HZPU-T 1000-2500/2100, Anno di costruzione: 2001, N. di serie: 7.5592, Forza di pressatura: 1.000 t, Tavola intercambiabile: 2.500 x 2.100 mm, Superficie del punzone: 2.500 x 2.100 mm, Corsa massima del punzone: 1.300 mm, Pressione cuscino tirante banco: 30-200 t, Corsa cuscino tirante: 300 mm, Comando pressa con OP Siemens Simatic OP 37, Quadri elettrici di comando e controllo
Itodox Ry Ntopfx Adpeb
Clickout
Uhingen
796 km
Pressa di prova
Müller WeingartenBZE1600-45.1 1
Müller WeingartenBZE1600-45.1 1
Condizione: usata, Anno di produzione: 1994, Marca: MÜLLER WEINGARTEN, Modello: BZE1600-45.1 1, anno di costruzione: 1994, numero di serie: 208019H1100, controllo pressa Beckhoff del 2013, forza di pressatura max 1.600 t (slittone 1.000 t + premilamiera 600 t accoppiabili), dimensioni tavola 4.500 x 2.500 mm, superficie slittone 4.500 x 2.300 mm, altezza di installazione 1.000 - 2.550 mm, corsa slittone 1.550 mm, forza del cuscino tavola 30 - 360 t, corsa cuscino di estrazione 400 mm, quadro comandi con porte scorrevoli e accessori, piastra adattatrice slittone/tavola. Vendita previa riserva. Attenzione! Macchina facente parte di un'asta online!
Ijdpfex Ry Euox Adpjtb
Annuncio economico
Turchia
1.354 km
Pressa idraulica a colonna da 300/100 tonnellate per stampaggio
CRONOSSTECHCHKSP 300/100
CRONOSSTECHCHKSP 300/100
Chiama
Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 300 t, larghezza tavola: 1.000 mm, lunghezza del tavolo: 1.000 mm, distanza tra le colonne: 1.000 mm, forza di retrazione: 100 t, corsa: 800 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH 300 / 100 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS
General Description
The CRONOSSTECH 300 / 100 ton four-column hydraulic deep drawing press is a high-rigidity hydraulic press solution developed for metal forming, deep drawing, and precision pressing applications.
The St52 grade steel welded body undergoes a stress-relief process by vibration. Thanks to this, parallelism and perpendicularity tolerances are maintained consistently throughout the full stroke length during pressing operations. Ram and cushion systems operate independently, with both stroke and tonnage precisely controllable via a touchscreen panel.
Equipped with REXROTH or PARKER hydraulic components, IE3 efficiency class motor, and PLC-controlled operation, the system ensures maximum efficiency and dependable performance. Automatic lubrication and electronic filter contamination alerts minimize maintenance requirements.
With its 300 / 100 ton capacity, this model provides an ideal industrial press solution for medium and high-tonnage metal forming, deep drawing, and die applications.
Key Advantages
- High rigidity four-column press frame
- Independent stroke and tonnage adjustment for ram and cushion
- Full control via touchscreen panel
- High precision and repeatability
- Durable design with low maintenance cost
Areas of Use
- Metal deep drawing applications
- Deep drawing operations
- Die try-out and production lines
- Auxiliary pressing processes
⚙️ STANDARD & TECHNICAL SPECIFICATIONS
TYPE: Four-column
BODY MATERIAL: St52 – ERDEMİR
COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs Induction hardened, chrome-plated shaft
SLIDE BEARING: Bronze Zr14
CAPACITY (RAM): 300 Ton
CAPACITY (CUSHION): 100 Ton
DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm
PARALLELISM TOLERANCE: 120 micron/meter
PERPENDICULARITY TOLERANCE: 60 micron/meter
STROKE (RAM): 800 mm
STROKE (CUSHION): 200 mm
MIN. OPENING HEIGHT: 100 mm
MAX. OPENING HEIGHT: 900 mm
WELD STRESS RELIEF: By vibration
WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731)
MAX. OPERATING PRESSURE: 250 Bar
TOTAL MOTOR POWER: 30 kW – IE3
MAIN PUMP: 45 cm³ – REXROTH or PARKER
MOVING TABLE FAST DESCENT: 150 mm/s
DEEP DRAWING SPEED: 12 mm/s
RETURN SPEED: 170 mm/s
CUSHION TABLE ADVANCE SPEED: 30 mm/s
MAIN CYLINDER BORE: Ø 390 mm – Ck45
Itodpfox N Unzex Adpsb
CUSHION CYLINDER BORE: Ø 230 mm – Ck45
AUXILIARY ACCELERATION CYLINDERS: 2 units
APPROX. PRESS DIMENSIONS: 4000 × 1450 × 1450 mm
BOTTOM TABLE HEIGHT FROM FLOOR: 1300 mm
FRONT CHARGING VALVE: NG 125
HYDRAULIC UNIT: REXROTH or PARKER
COOLING SYSTEM: EMMEGI – CIESSE – PARKER
OFF-LINE FILTRATION: REXROTH or PARKER
PLC: DELTA
TOUCHSCREEN PANEL: DELTA 7”
SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER
APPROXIMATE WEIGHT: 18 Tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Annuncio economico
Turchia
1.354 km
PRESSA IDRAULICA A COLONNE DA 250/80 TON PER IMBUTITURA
CRONOSSTECHCHKSP 250/80
CRONOSSTECHCHKSP 250/80
Chiama
Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 250 t, larghezza tavola: 1.000 mm, lunghezza del tavolo: 1.000 mm, distanza tra le colonne: 1.000 mm, forza di retrazione: 80 t, corsa: 800 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH 250 / 80 TON FOUR-COLUMN HYDRAULIC DRAWING PRESS
General Description
The CRONOSSTECH 250 / 80-ton four-column hydraulic drawing press is a high-rigidity four-column hydraulic press solution designed for metal drawing, deep drawing, and precision pressing applications.
Its St52-grade steel frame is stress-relieved via a vibration process, ensuring superior parallelism and squareness tolerances during prolonged operation. The ram and cushion systems operate independently; stroke and pressure settings can be precisely adjusted via the touchscreen control panel.
Fitted with REXROTH or PARKER hydraulic components, IE3 efficiency class motor, and PLC-controlled structure, it offers high reliability and operational efficiency. An automatic lubrication system and electronic filter contamination alerts help minimize maintenance requirements.
With its 250 / 80 ton capacity, this model is an ideal industrial press solution for medium to heavy-duty metal forming, deep drawing, and die applications.
Key Advantages
- Four-column high-rigidity press frame
- Independent stroke and tonnage adjustment for ram and cushion
- Full control via touchscreen panel
- High precision and repeatability
- Long service life with low maintenance cost
Application Areas
- Metal spinning/flow forming applications
- Deep drawing operations
- Die testing and production lines
- Auxiliary pressing processes
⚙️ STANDARD AND TECHNICAL SPECIFICATIONS
TYPE: Four-column
FRAME MATERIAL: St52 – ERDEMİR
COLUMN SHAFT DIAMETER: Ø 90 – 4pcs, induction-hardened and chrome-plated shafts
SLIDE BEARING: Bronze Zr14
CAPACITY (RAM): 250 tons
CAPACITY (CUSHION): 80 tons
DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm
PARALLELISM TOLERANCE: 120 micron/meter
SQUARENESS TOLERANCE: 60 micron/meter
STROKE (RAM): 800 mm
STROKE (CUSHION): 200 mm
MIN. TABLE OPENING: 100 mm
MAX. TABLE OPENING: 900 mm
WELDING STRESS RELIEF: Vibration stress relief
WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731)
MAX. OPERATING PRESSURE: 250 Bar
TOTAL MOTOR POWER: 22 kW – IE3
MAIN PUMP: 36 cm³ – REXROTH or PARKER
MOVING TABLE FAST DESCENT: 150 mm/sec
DRAWING SPEED: 12 mm/sec
RETURN SPEED: 170 mm/sec
CUSHION TABLE ADVANCE SPEED: 30 mm/sec
MAIN CYLINDER BORE DIAMETER: Ø 360 mm – Ck45
CUSHION CYLINDER BORE DIAMETER: Ø 200 mm – Ck45
AUXILIARY ACCELERATION CYLINDERS: 2 units
APPROX. DIMENSIONS: 4000 × 1450 × 1450 mm
LOWER TABLE HEIGHT FROM FLOOR: 1300 mm
FRONT CHARGE VALVE: NG 125
HYDRAULIC UNIT: REXROTH or PARKER
COOLING SYSTEM: EMMEGI – CIESSE – PARKER
OFF-LINE FILTRATION: REXROTH or PARKER
PLC: DELTA
Itjdpfx Aox N Um Rsdpob
TOUCH PANEL: DELTA 7”
CONTROL COMPONENTS: SIEMENS – SCHNEIDER
APPROX. WEIGHT: 16 Tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Annuncio economico
Turchia
1.354 km
Pressa idraulica per stampaggio profondo a colonne da 200/70 tonnellate
CRONOSSTECHCHKSP 200/70
CRONOSSTECHCHKSP 200/70
Chiama
Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 200 t, larghezza tavola: 1.000 mm, lunghezza del tavolo: 1.000 mm, distanza tra le colonne: 1.000 mm, forza di retrazione: 70 t, corsa: 800 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH 200 / 70 TON COLUMN-TYPE HYDRAULIC DEEP DRAWING PRESS
General Description
The CRONOSSTECH 200 / 70 ton column type hydraulic deep drawing press is a high-rigidity, four-column hydraulic press designed for metal forming, deep drawing, and precision pressing applications.
The ST52 grade steel construction body undergoes stress-relief via vibration. This ensures high parallelism and perpendicularity tolerances are maintained even during prolonged operation. The ram and cushion systems work independently; stroke and pressure settings can be precisely adjusted via the touchscreen panel.
Equipped with REXROTH or PARKER hydraulic components, IE3 class motor, and PLC-controlled architecture, the unit delivers high efficiency and reliable operation. The automatic lubrication system and electronic filter contamination alerts minimize maintenance needs.
With a capacity of 200 / 70 tons, this model is an ideal industrial press solution for medium- and heavy-duty metal forming, deep drawing, and tool-tryout applications.
Key Advantages
- Rigid four-column press frame
- Independent stroke and tonnage adjustment for ram and cushion
- Full control via touchscreen panel
- High accuracy and repeatability
- Long service life and low maintenance cost
Fields of Application
- Metal forming operations
- Deep drawing applications
- Die tryouts and production lines
- Auxiliary pressing operations
⚙️ STANDARD AND TECHNICAL FEATURES
TYPE: Four Column
FRAME MATERIAL: St52 – ERDEMIR
COLUMN SHAFT DIAMETER: Ø90 mm – 4 pcs, induction-hardened chrome plated
SLIDE BEARING: Bronze Zr14
CAPACITY (RAM): 200 Ton
CAPACITY (CUSHION): 70 Ton
DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm
PARALLELISM TOLERANCE: 120 micron/meter
PERPENDICULARITY TOLERANCE: 60 micron/meter
STROKE (RAM): 800 mm
STROKE (CUSHION): 200 mm
MIN. DAYLIGHT: 100 mm
MAX. DAYLIGHT: 900 mm
WELDING STRESS RELIEF: Vibration stress relief
WELDING PROCEDURE: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731)
Itjdpfxsx N Umqs Adpeb
MAX. WORKING PRESSURE: 250 Bar
TOTAL MOTOR POWER: 22 kW – IE3
MAIN PUMP: 36 cm³ – REXROTH or PARKER
MOVING TABLE FAST DESCENT: 150 mm/sec
DEEP DRAWING SPEED: 12 mm/sec
RETURN SPEED: 170 mm/sec
CUSHION TABLE ADVANCE SPEED: 30 mm/sec
MAIN CYLINDER INNER DIAMETER: Ø320 mm – Ck45
CUSHION CYLINDER INNER DIAMETER: Ø190 mm – Ck45
AUXILIARY ACCELERATION CYLINDERS: 2 pcs
APPROXIMATE DIMENSIONS: 4000 × 1450 × 1450 mm
LOWER TABLE HEIGHT FROM FLOOR: 1300 mm
MAIN FILLING VALVE: NG 125
HYDRAULIC UNIT: REXROTH or PARKER
COOLING SYSTEM: EMMEGI – CIESSE – PARKER
OFF-LINE FILTRATION: REXROTH or PARKER
PLC: DELTA
TOUCHSCREEN PANEL: DELTA 7”
SWITCHGEAR: SIEMENS – SCHNEIDER
APPROXIMATE WEIGHT: 14.5 Ton
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Annuncio economico
Turchia
1.354 km
PRESSA IDRAULICA TIPO A COLONNE 150/50 TON PER IMBUTITURA
CRONOSSTECHCHKSP 150/50
CRONOSSTECHCHKSP 150/50
Chiama
Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 150 t, larghezza tavola: 800 mm, lunghezza del tavolo: 800 mm, distanza tra le colonne: 800 mm, corsa: 600 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH 150/50 TON FOUR-COLUMN HYDRAULIC DRAWING PRESS
General Description
The CRONOSSTECH 150/50 ton four-column hydraulic drawing press is an industrial press solution developed for metal drawing, deep drawing, and precision pressing applications, featuring a rigid four-column frame structure.
The St52-grade steel construction frame undergoes a stress-relief process using vibration method, ensuring high parallelism and perpendicularity tolerances even during long-term operation. The ram and cushion systems operate independently; stroke and pressure settings can be precisely adjusted via the touch panel.
With REXROTH or PARKER hydraulic components, IE3 class motor, and a PLC-controlled system, the press delivers high efficiency, reliability, and long service life. Thanks to the automatic lubrication system and electronic filter contamination alerts, maintenance requirements are minimized.
With its 150/50 ton capacity, this model offers an ideal solution for mass production, die testing, and medium to high tonnage deep drawing applications.
Key Advantages
- Rigid four-column press frame
- Independent stroke and tonnage adjustment for ram and cushion
- Full control via touch panel
- High precision and repeatability
- Low maintenance cost and long lifespan
Fields of Application
- Metal spinning/drawing operations
- Deep drawing applications
- Die testing and production processes
- Auxiliary pressing operations
⚙️ STANDARD AND TECHNICAL SPECIFICATIONS
TYPE: Four-column
FRAME MATERIAL: St52 – ERDEMİR
COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs. induction-hardened, chrome-plated shafts
SLIDE BEARING: Bronze Zr14
CAPACITY (RAM): 150 Ton
CAPACITY (CUSHION): 50 Ton
DISTANCE BETWEEN COLUMNS: 800 × 800 mm
Iodpfjx N Ul Tex Adpstb
PARALLELISM TOLERANCE: 120 micron/m
PERPENDICULARITY TOLERANCE: 60 micron/m
STROKE (RAM): 600 mm
STROKE (CUSHION): 200 mm
MIN. CLEAR OPENING: 100 mm
MAX. CLEAR OPENING: 700 mm
WELDING STRESS RELIEF: Stress relieved by vibration
WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731)
MAX. WORKING PRESSURE: 250 Bar
TOTAL MOTOR POWER: 18.5 kW – IE3
MAIN PUMP: 36 cm³ – REXROTH or PARKER
MOVABLE TABLE FAST DESCENT SPEED: 150 mm/s
MOVABLE TABLE DRAWING SPEED: 12 mm/s
MOVABLE TABLE RETURN SPEED: 170 mm/s
CUSHION TABLE ADVANCE SPEED: 30 mm/s
MAIN CYLINDER BORE: Ø 280 mm – Ck45
CUSHION CYLINDER BORE: Ø 160 mm – Ck45
AUXILIARY ACCELERATION CYLINDERS: 2 units
APPROX. PRESS HEIGHT: 3800 mm
APPROX. PRESS WIDTH: 1150 mm
APPROX. PRESS DEPTH: 1150 mm
HEIGHT OF LOWER TABLE FROM FLOOR: 1200 mm
PRE-FILL VALVE: NG 125
HYDRAULIC UNIT: REXROTH or PARKER
COOLING SYSTEM: EMMEGI – CIESSE – PARKER
OFF-LINE FILTRATION: REXROTH or PARKER
LUBRICATION TYPE: Automatic (adjustable via screen)
RAM / CUSHION STROKE AND TONNAGE SETTING: Adjustable via screen
SYSTEM & PRESS STATUS INFORMATION: Viewable from screen
DIE MEMORY: Configurable via screen
LINEAR POSITION SENSOR: NOVATECHNIK or TURCK
PLC SYSTEM: DELTA
TOUCH PANEL: DELTA 7”
CONTROL COMPONENTS: SIEMENS – SCHNEIDER
APPROXIMATE WEIGHT: 9 Tons
Production Note
This machine is manufactured in Turkey by CRONOSSTECH.
Annuncio economico
Turchia
1.354 km
Pressa idraulica tipo a colonne per imbutitura 100/40 TON
CRONOSSTECHCHKSP 100/40
CRONOSSTECHCHKSP 100/40
Chiama
Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 100 t, larghezza tavola: 800 mm, lunghezza del tavolo: 800 mm, distanza tra le colonne: 800 mm, forza di retrazione: 40 t, corsa: 600 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH 100/40 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS
General Description
The CRONOSSTECH 100/40 ton four-column hydraulic deep drawing press is an industrial press solution with a rigid four-column body, engineered for metal forming, deep drawing, and precision pressing applications.
The St52-grade steel frame undergoes stress-relief by vibration to ensure long-term retention of high parallelism and squareness tolerances. Ram and cushion systems operate independently; stroke and pressure settings can be precisely controlled via the touchscreen panel.
Fitted with REXROTH or PARKER hydraulic components, IE3 class motor, and PLC-controlled system architecture, this press delivers high efficiency, reliability, and a long service life. An automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements.
This model is an ideal solution for medium-scale serial production, die testing, and precision forming processes.
Key Advantages
- Rigid four-column press body
- Independent stroke and tonnage setting for ram and cushion
- Full control via touchscreen interface
- High precision and repeatability
- Low maintenance cost and long lifespan
Fields of Application
- Metal forming operations
- Deep drawing applications
- Die testing and prototyping
- Auxiliary pressing operations
⚙️ STANDARD AND TECHNICAL SPECIFICATIONS
TYPE: Four-Column
BODY MATERIAL: St52 – ERDEMİR
COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction-hardened chromed shafts
SLIDE BEARING: Bronze Zr14
CAPACITY (RAM): 100 Tons
CAPACITY (CUSHION): 40 Tons
DISTANCE BETWEEN COLUMNS: 800 × 800 mm
PARALLELISM TOLERANCE: 120 micron/m
SQUARENESS TOLERANCE: 60 micron/m
STROKE (RAM): 600 mm
STROKE (CUSHION): 200 mm
MIN. DIE HEIGHT: 100 mm
MAX. DIE HEIGHT: 700 mm
WELDING STRESS RELIEF: Vibration method
WELDING EXECUTION: WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) certified by TÜRK-AK
MAX. OPERATING PRESSURE: 250 Bar
TOTAL MOTOR POWER: 15 kW – IE3
MAIN PUMP: 22 cm³ – REXROTH or PARKER
MOVABLE TABLE FAST DOWN SPEED: 150 mm/s
MOVABLE TABLE FORMING SPEED: 12 mm/s
MOVABLE TABLE RETURN SPEED: 170 mm/s
CUSHION TABLE FORWARD SPEED: 30 mm/s
MAIN CYLINDER BORE: Ø 230 mm – Ck45
CUSHION CYLINDER BORE: Ø 145 mm – Ck45
AUXILIARY ACCELERATION CYLINDERS: 2 pcs
APPROX. PRESS HEIGHT: 3500 mm
APPROX. PRESS WIDTH: 1150 mm
APPROX. PRESS DEPTH: 1150 mm
DISTANCE FROM FLOOR TO LOWER TABLE: 1200 mm
PRE-FILL VALVE: NG 100
HYDRAULIC UNIT: REXROTH or PARKER
COOLING SYSTEM: EMMEGI – CIESSE – PARKER
OFF-LINE FILTRATION: REXROTH or PARKER
LUBRICATION TYPE: Automatic (screen-adjustable)
RAM / CUSHION STROKE & TONNAGE ADJUSTMENT: Screen-adjustable
SYSTEM & PRESS STATUS INFORMATION: Accessible via display
DIE DATA MEMORY: Adjustable via display
LINEAR POSITION TRANSDUCER: NOVATECHNIK or TURCK
PLC: DELTA
TOUCH PANEL: DELTA 7”
ELECTRICAL COMPONENTS: SIEMENS – SCHNEIDER
APPROX. WEIGHT: 7.5 Tons
Iodpfex N Ulyex Adpstb
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Annuncio economico
Turchia
1.354 km
Pressa idraulica a colonne da 80/30 tonnellate per imbutitura
CRONOSSTECHCHKSP 80/30
CRONOSSTECHCHKSP 80/30
Chiama
Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 80 t, larghezza tavola: 700 mm, lunghezza del tavolo: 700 mm, distanza tra le colonne: 700 mm, forza di retrazione: 30 t, corsa: 500 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH 80/30 Ton Column-Type Hydraulic Drawing Press
General Description
The CRONOSSTECH 80/30 ton column-type hydraulic drawing press is an industrial press solution designed for high-precision metal forming, deep drawing, and die testing applications, featuring a four-column rigid frame structure.
The ST52 grade steel body undergoes stress relief through vibration, ensuring high parallelism and perpendicularity tolerances during pressing operations. The ram and cushion systems operate independently; stroke and pressure settings can be precisely controlled via the operator panel.
Equipped with REXROTH or PARKER hydraulic components, IE3 efficiency class motor, and PLC control, the press provides long-lasting, safe, and energy-efficient operation. Thanks to the automatic lubrication system and filter contamination alerts, maintenance requirements are minimized.
This model is ideal for small and medium-scale serial production, die testing, and precision forming applications.
Key Advantages
- Four-column rigid press frame structure
- Independent stroke and tonnage adjustment for ram and cushion
- Full control via touch panel
- High repeatability and precision
- Low maintenance cost, long service life
Fields of Application
- Metal forming applications
- Deep drawing operations
- Die testing and prototype production
- Auxiliary pressing processes
Itedpfx Adsx N Ultjpob
⚙️ STANDARD AND TECHNICAL SPECIFICATIONS
TYPE: Four-column
FRAME MATERIAL: ST52 – ERDEMİR
COLUMN DIAMETER: Ø 90 mm – 4 pcs, induction hardened chrome-plated shaft
SLIDE BEARING: Bronze Zr14
CAPACITY (RAM): 80 Ton
CAPACITY (CUSHION): 30 Ton
DISTANCE BETWEEN COLUMNS: 700 × 700 mm
PARALLELISM TOLERANCE: 120 micron/meter
PERPENDICULARITY TOLERANCE: 60 micron/meter
STROKE (RAM): 500 mm
STROKE (CUSHION): 150 mm
MIN. CLEARANCE: 100 mm
MAX. CLEARANCE: 600 mm
WELDING STRESS RELIEF: Vibration method
WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731)
MAX. OPERATING PRESSURE: 250 Bar
TOTAL MOTOR POWER: 11 kW – IE3
MAIN PUMP: 22 cm³ – REXROTH or PARKER
MOVABLE TABLE FAST DESCENT SPEED: 150 mm/s
MOVABLE TABLE PRESSING SPEED: 12 mm/s
MOVABLE TABLE RETURN SPEED: 170 mm/s
CUSHION TABLE FORWARD SPEED: 30 mm/s
MAIN CYLINDER INNER DIAMETER: Ø 200 mm – Ck45
CUSHION CYLINDER INNER DIAMETER: Ø 125 mm – Ck45
AUXILIARY ACCELERATION CYLINDERS: 2 units
APPROX. PRESS HEIGHT: 3300 mm
APPROX. PRESS WIDTH: 1050 mm
APPROX. PRESS DEPTH: 1050 mm
LOWER TABLE HEIGHT FROM FLOOR: 1100 mm
PRE-FILL VALVE: NG 100
HYDRAULIC UNIT: REXROTH or PARKER
COOLING SYSTEM: EMMEGI – CIESSE – PARKER
OFF-LINE FILTRATION: REXROTH or PARKER
LUBRICATION TYPE: Automatic (Configurable via screen)
RAM / CUSHION STROKE AND TONNAGE ADJUSTMENT: Adjustable via screen
SYSTEM & PRESS STATUS INFORMATION: Viewable on screen
DIE MEMORY: Configurable via screen
LINEAR POSITION SENSOR: NOVATECHNIK or TURCK
PLC SYSTEM: DELTA
TOUCH PANEL: DELTA 7”
SWITCHGEAR: SIEMENS – SCHNEIDER
APPROX. WEIGHT: 5.5 Tons
Annuncio economico
Turchia
1.354 km
Pressa idraulica per stampaggio profondo tipo a colonne 60/20 ton
CRONOSSTECHCHKSP 60/20
CRONOSSTECHCHKSP 60/20
Chiama
Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 60 t, larghezza tavola: 700 mm, lunghezza del tavolo: 700 mm, distanza tra le colonne: 700 mm, forza di retrazione: 20 t, corsa: 400 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH 60/20 TON FOUR-COLUMN HYDRAULIC DRAWING PRESS
General Description
The CRONOSSTECH 60/20 ton four-column hydraulic drawing press is a rigid and compact press solution designed for precision metal forming, deep drawing, and drawing applications. The four-column construction ensures stable parallelism and perpendicularity tolerances throughout the pressing process.
The frame, made from St52 quality steel, undergoes stress relief by vibration. Both ram and blankholder systems can be controlled independently; stroke and pressure settings can be precisely adjusted via the touchscreen panel.
Fitted with REXROTH or PARKER branded hydraulic components, an IE3 class motor, and an automatic lubrication system, it offers safe, efficient, and long-lasting operation. Thanks to its PLC-controlled structure, operator errors are minimized.
This model is an ideal solution for small and medium-scale drawing, deep drawing, die trial, and auxiliary pressing applications.
Key Advantages
- Rigid four-column press body structure
- Independent stroke and tonnage control for ram and blankholder
- System can be adjusted via touchscreen panel
- High accuracy and repeatability
- Low maintenance requirement, long service life
Areas of Application
- Metal spinning/drawing applications
- Deep drawing operations
- Die trial and prototype production
- Metal processing and auxiliary production lines
⚙️ STANDARD & TECHNICAL SPECIFICATIONS
TYPE: Four-Column
FRAME MATERIAL: St52 – ERDEMİR
COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs. Induction hardened chrome-plated shaft
SLIDE BEARING HOUSING: Bronze Zr14
CAPACITY (RAM): 60 Ton
CAPACITY (BLANKHOLDER): 20 Ton
DISTANCE BETWEEN COLUMNS: 700 × 700 mm
PARALLELISM TOLERANCE: 120 micron/meter
PERPENDICULARITY TOLERANCE: 60 micron/meter
STROKE (RAM): 400 mm
STROKE (BLANKHOLDER): 100 mm
MIN. OPENING HEIGHT: 100 mm
MAX. OPENING HEIGHT: 500 mm
WELDING STRESS RELIEF: By vibration
WELDING APPLICATION: WPQR and WPS approved by TÜRK-AK, accredited according to EN ISO 15614-1:2017 (EN ISO 14731)
MAX. OPERATING PRESSURE: 250 Bar
TOTAL MOTOR POWER: 7.5 kW – IE3
MAIN PUMP: 22 cm³ – REXROTH or PARKER
TRAVELLING TABLE FAST DESCENT SPEED: 150 mm/s
TRAVELLING TABLE DRAWING SPEED: 12 mm/s
TRAVELLING TABLE RETURN SPEED: 170 mm/s
BLANKHOLDER TABLE FORWARD SPEED: 30 mm/s
Iodpex N Ulgefx Adpjtb
MAIN CYLINDER BORE: Ø 175 mm – Ck45
BLANKHOLDER CYLINDER BORE: Ø 100 mm – Ck45
AUXILIARY ACCELERATION CYLINDERS: 2 units
APPROX. PRESS HEIGHT: 3100 mm
APPROX. PRESS WIDTH: 1050 mm
APPROX. PRESS DEPTH: 1050 mm
BOTTOM TABLE HEIGHT FROM FLOOR: 1000 mm
PRE-FILL VALVE: NG 100
HYDRAULIC UNIT: REXROTH or PARKER
COOLING SYSTEM: EMMEGI – CIESSE – PARKER
OFF-LINE FILTRATION: REXROTH or PARKER
LUBRICATION TYPE: Automatic (Adjustable from panel)
RAM / BLANKHOLDER STROKE & TONNAGE ADJUSTMENT: Adjustable from panel
SYSTEM & PRESS STATUS INFORMATION: Displayed on screen
DIE MEMORY: Adjustable from panel
LINEAR POSITION TRANSDUCER: NOVATECHNIK or TURCK
PLC: DELTA
TOUCH PANEL: DELTA 7”
SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER
APPROX. WEIGHT: 5 Ton
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Annuncio economico
Turchia
1.354 km
Pressa idraulica da stampaggio tipo a colonne 40/15 tonnellate
CRONOSSTECHCHKSP 40/15
CRONOSSTECHCHKSP 40/15
Chiama
Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 40 t, larghezza tavola: 700 mm, lunghezza del tavolo: 700 mm, distanza tra le colonne: 700 mm, forza di retrazione: 15 t, corsa: 400 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH 40/15 TON FOUR-COLUMN HYDRAULIC SPINNING PRESS
General Description
The CRONOSSTECH 40/15 ton four-column hydraulic spinning press is a compact and robust press solution designed for precise metal forming, deep drawing, and spinning applications. Its four-column frame construction ensures stable parallelism and squareness tolerances throughout the pressing cycle.
The press frame, manufactured from St52 grade steel, undergoes stress relief treatment via vibration methods. Ram and pot systems are independently controlled, and stroke and pressure adjustments can be made precisely via the touchscreen panel.
Equipped with REXROTH or PARKER hydraulic components, an IE3 class motor, and an automatic lubrication system, it offers long-lasting, safe, and efficient operation. The user-friendly PLC-controlled structure minimizes operator errors.
This model provides an ideal solution for small to medium-sized spinning, deep drawing, die testing, and precision pressing applications.
Key Advantages
- Four-column rigid press frame structure
- Independent stroke and tonnage control for ram and pot
- Adjustable system via touchscreen panel
- High precision and repeatability
- Low maintenance requirement, long service life
Applications
- Metal spinning operations
- Deep drawing processes
- Die testing and prototyping
- Metal working and auxiliary production lines
⚙️ STANDARD & TECHNICAL SPECIFICATIONS
TYPE: Four-column
FRAME MATERIAL: St52 – ERDEMİR
COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pieces, induction hardened and chrome plated shafts
SLIDE BEARING: Bronze Zr14
CAPACITY (RAM): 40 Ton
CAPACITY (POT): 15 Ton
DISTANCE BETWEEN COLUMNS: 700 × 700 mm
PARALLELISM TOLERANCE: 120 microns/meter
Itedpex N Uk Nefx Adpob
SQUARENESS TOLERANCE: 60 microns/meter
STROKE (RAM): 400 mm
STROKE (POT): 100 mm
MIN. TABLE OPENING: 100 mm
MAX. TABLE OPENING: 500 mm
WELDING STRESS RELIEF: Vibration stress relief
WELDING APPLICATION: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1:2017 (EN ISO 14731)
MAX. WORKING PRESSURE: 250 Bar
TOTAL MOTOR POWER: 5.5 kW – IE3
MAIN PUMP: 22 cm³ – REXROTH or PARKER
MOVING TABLE FAST DESCENT SPEED: 150 mm/s
MOVING TABLE SPINNING SPEED: 12 mm/s
MOVING TABLE RETURN SPEED: 170 mm/s
POT TABLE FORWARD SPEED: 30 mm/s
MAIN CYLINDER BORE: Ø 145 mm – Ck45
POT CYLINDER BORE: Ø 90 mm – Ck45
AUXILIARY ACCELERATION CYLINDERS: 2 units
APPROX. PRESS HEIGHT: 3100 mm
APPROX. PRESS WIDTH: 1050 mm
APPROX. PRESS DEPTH: 1050 mm
DISTANCE OF BOTTOM TABLE FROM GROUND: 1000 mm
MAIN CHARGE VALVE: NG 100
HYDRAULIC UNIT: REXROTH or PARKER
COOLING SYSTEM: EMMEGI – CIESSE – PARKER
OFF-LINE FILTRATION: REXROTH or PARKER
LUBRICATION TYPE: Automatic (adjustable via screen)
RAM / POT STROKE AND TONNAGE SETTING: Adjustable via screen
SYSTEM & PRESS STATUS INFORMATION: Viewable via screen
DIE MEMORY: Adjustable via screen
LINEAR ENCODER: NOVATECHNIK or TURCK
PLC APPLICATION: DELTA
TOUCHSCREEN PANEL: DELTA 7”
SWITCHGEAR: SIEMENS – SCHNEIDER
APPROXIMATE WEIGHT: 4.5 Tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Annuncio economico
Turchia
1.354 km
Pressa idraulica H 2500/800 ton per stampaggio profondo
CRONOSSTECHCHSP 2500/800
CRONOSSTECHCHSP 2500/800
Chiama
Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 2.500 t, larghezza tavola: 1.800 mm, lunghezza del tavolo: 2.600 mm, forza di retrazione: 800 t, corsa: 1.000 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHSP 2500/800
H-Type Hydraulic Deep Drawing (Forming) Press – 8-Gib
General Description
The CRONOSSTECH CHSP series H-type hydraulic forming presses are developed for heavy-duty deep drawing applications that require very high tonnage, large table dimensions, and precise blank holder force. The 8-gib H-frame design ensures high rigidity throughout the pressing process, maintaining parallelism and perpendicularity tolerances over the entire stroke length for both the ram and table movements.
The CHSP 2500/800 model offers maximum stability, controlled material flow, and repeatable production performance for large and deep drawing tools with its 2500-ton main ram and 800-ton blank holder capacity. The welded steel frame, stress-relieved by vibration, is engineered for reliable and long-lasting use under heavy industrial conditions.
⚙️ Standard Equipment
• Welded steel frame, 8-gib H-frame press body
• Stress-relieved frame via vibration
• Bronze Zr14 gib liners
• WPQR and WPS approved welding applications with TURK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731)
• PLC-controlled hydraulic system
• Touchscreen panel interface (DELTA 7”)
• Adjustable ram and blank holder stroke control
• Adjustable ram and blank holder tonnage (pressure) control
• Automatic lubrication system
• Electronically monitored filter contamination warning
• Real-time monitoring of hydraulic oil temperature and system status on display
• Off-line filtration and industrial cooling system
• SIEMENS – SCHNEIDER electrical components
• Heavy-duty industrial safety systems
📐 Technical Specifications – CHSP 2500/800
Type: Welded steel construction, 8-gib H-frame press
Iedpfsx N Uk Ajx Adpjtb
Frame Material: St52 – ERDEMIR
Gib Liners: Bronze Zr14
Capacity (Ram / Blank Holder): 2500 / 800 Tons
Moving / Fixed Table: 1800 × 2600 mm
Parallelism / Perpendicularity: 120 / 60 micron/meter
Stroke (Ram / Blank Holder): 1000 / 350 mm
Daylight (Min / Max): 200 / 1200 mm
Max. Working Pressure: 250 Bar
Total Motor Power: 180 kW – IE3
Main Pump: 140 cm³ – REXROTH or PARKER
Main Cylinder: Ø565 mm – Ck45 (4 units)
Blank Holder Cylinder: Ø450 mm – Ck45 (2 units)
Pre-fill Valve: NG 200
PLC / Panel: DELTA / DELTA 7”
Approximate Weight: 132 Tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Annuncio economico
Turchia
1.354 km
PRESSA IDRAULICA PER IMBUTITURA PROFONDA MONODIREZIONALE H TIPO 2000/600
CRONOSSTECHCHSP 2000/600
CRONOSSTECHCHSP 2000/600
Chiama
Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 2.000 t, larghezza tavola: 1.500 mm, lunghezza del tavolo: 2.500 mm, forza di retrazione: 600 t, corsa: 1.000 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHSP 2000/600
H-Type Hydraulic Deep Drawing Press (with 8 Slides)
General Description
The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed for heavy-duty deep drawing applications requiring very high tonnage, large table dimensions, and controlled blank holder force. Thanks to the 8-slide H-frame design, ram and table movements are executed with high rigidity during the pressing operation, maintaining parallelism and perpendicularity tolerances consistently over the entire stroke.
The CHSP 2000/600 model offers high control and repeatability for large molds and deep drawing or forming operations, with 2000 tons main ram and 600 tons blank holder capacity. Its stress-relieved steel welded frame ensures long-lasting and reliable performance under heavy industrial conditions.
⚙️ Standard Equipment
• Steel construction, 8-slide H-frame body
• Stress-relieved frame by vibration
• Bronze Zr14 slide bearings
• WPQR and WPS certified welding process approved by TURK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731)
• PLC-controlled hydraulic system
• 7” DELTA touchscreen control panel
• Adjustable ram and blank holder stroke control
• Adjustable ram and blank holder tonnage (pressure) control
Itodpfxjx N Ukvo Adpob
• Automatic lubrication system
• Electronically monitored filter contamination alarm
• Monitoring of hydraulic oil temperature and system status via panel
• Off-line filtration and industrial cooling system
• SIEMENS – SCHNEIDER switchgear components
• Industrial safety systems for operator protection
📐 Technical Specifications – CHSP 2000/600
Type: Steel construction, 8-slide H-frame body
Frame Material: St52 – ERDEMİR
Slide Bearings: Bronze Zr14
Capacity (Ram / Blank Holder): 2000 / 600 Tons
Movable / Fixed Table: 1500 × 2500 mm
Parallelism / Perpendicularity: 120 / 60 micron/meter
Stroke (Ram / Blank Holder): 1000 / 350 mm
Daylight (Min / Max): 200 / 1200 mm
Max. Working Pressure: 250 Bar
Total Motor Power: 180 kW – IE3
Main Pump: 140 cm³ – REXROTH or PARKER
Main Cylinder: Ø720 mm – Ck45 (2 pcs)
Blank Holder Cylinder: Ø390 mm – Ck45 (2 pcs)
Pre-fill Valve: NG 200
PLC / Panel: DELTA / DELTA 7”
Approximate Weight: 105 Tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Annuncio economico
Turchia
1.354 km
PRESSA IDRAULICA PER IMBUTITURA PROFONDA TIPO H 1500/500 TON
CRONOSSTECHCHSP 1500/500
CRONOSSTECHCHSP 1500/500
Chiama
Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 1.500 t, larghezza tavola: 1.500 mm, lunghezza del tavolo: 2.400 mm, forza di retrazione: 500 t, corsa: 1.000 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHSP 1500/500
H-Type Hydraulic Deep Drawing (Forming) Press – 8-Gib
General Description
The CRONOSSTECH CHSP series H-type hydraulic forming presses are engineered to provide maximum frame rigidity, precise parallelism, and long service life for deep drawing applications requiring very high tonnage and large bolster areas. Thanks to its 8-gib H-frame construction, ram and bolster movements are stable and precisely controlled throughout the pressing operation.
The CHSP 1500/500 model, with a 1500-ton main ram and 500-ton cushion capacity, is designed for large-sized dies, deep drawing, and controlled forming operations. The stress-relieved welded steel frame offers high durability and reliability under heavy-duty industrial conditions.
⚙️ Standard Equipment
• Welded steel construction, 8-gib H-frame body
• Stress-relieved frame structure
• Bronze Zr14 ram/gib guides
• WPQR and WPS certified welding applications approved by TURKAK (EN ISO 15614-1:2017 / EN ISO 14731)
• PLC-controlled hydraulic system
• 7” DELTA touchscreen control panel
• Adjustable ram and cushion stroke control
• Adjustable ram and cushion tonnage (pressure) control
• Automatic lubrication system
• Electronic filter contamination monitoring
• Real-time display of hydraulic unit oil temperature and system status
• Off-line filtration and industrial cooling system
• SIEMENS – SCHNEIDER switching components
• Industrial-grade safety systems for operator protection
Iodsx N Ukispfx Adpstb
📐 Technical Specifications – CHSP 1500/500
Type: Welded steel construction, 8-gib H-frame body
Frame Material: St52 – ERDEMIR
Guide Material: Bronze Zr14
Capacity (Ram / Cushion): 1500 / 500 Ton
Moving / Fixed Bolster: 1500 × 2400 mm
Parallelism / Squareness: 120 / 60 micron/meter
Stroke (Ram / Cushion): 1000 / 350 mm
Daylight Opening (Min / Max): 200 / 1200 mm
Max. Working Pressure: 250 Bar
Total Motor Power: 90 kW – IE3
Main Pump: 101 cm³ – REXROTH or PARKER
Main Cylinders: Ø620 mm – Ck45 (2 units)
Cushion Cylinders: Ø360 mm – Ck45 (2 units)
Pre-fill Valve: NG 200
PLC / Panel: DELTA / DELTA 7”
Approximate Weight: 87 Ton
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.






































































































