Cronosstech Chsp 150/50 usato in vendita (39.164)

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 150 t, corsa: 600 mm, larghezza tavola: 1.000 mm, lunghezza del tavolo: 1.200 mm, forza di retrazione: 50 t, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHSP 150/50 H-Type Hydraulic Deep Drawing (Flanging) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting working principle to ensure controlled material flow for sheet metal forming, deep drawing, and flanging applications. The 8-guided H-frame structure provides maximum rigidity during the pressing cycle; parallelism and perpendicularity tolerances are consistently maintained throughout the stroke. The CHSP 150/50 model is engineered for precise and repeatable deep drawing applications, featuring a main ram capacity of 150 tons and a blank holder (pot) capacity of 50 tons. The frame construction is stress-relieved by vibration to ensure long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 slide bearings - WPQR and WPS welding procedures accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram and pot stroke control - Adjustable ram and pot tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via display - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 150/50 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 150 Tons Capacity (Pot): 50 Tons Moving Table Size: 1000 × 1200 mm Fixed Table Size: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 600 mm Stroke (Pot): 200 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Weld Stress Relief: Vibratory stress relief Welding Application: WPQR and WPS approved by TÜRK-AK, EN ISO 15614-1:2017 (Welding applications are supervised by certified “welding coordination engineers” in accordance with EN ISO 14731) Max. Operating Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Pot Table Forward Speed: 30 mm/s Main Cylinder Inner Diameter: Ø280 mm – Ck45 Pot Cylinder Inner Diameter: Ø160 mm – Ck45 Auxiliary Accelerating Cylinders: 2 units Approximate Height: 3650 mm Approximate Width: 2950 mm Approximate Depth: 2000 mm Lower Table Height from Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Displacement Scale: NOVATECHNIK or TURCK PLC System: DELTA Hfedpfex N T U Hox Anisg Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 11 Tons Manufacturing Note This machine is produced by CRONOSSTECH in Turkey.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 400 t, corsa: 1.000 mm, larghezza tavola: 1.200 mm, lunghezza del tavolo: 1.500 mm, forza di retrazione: 150 t, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHSP 400/150 H-Type Hydraulic Deep Drawing (Forming) Press – 8 Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to ensure controlled material flow for sheet metal forming, deep drawing, and forming applications. Thanks to the 8-slided H-frame structure, maximum rigidity is provided during the pressing process; parallelism and perpendicularity tolerances are consistently maintained throughout the long stroke. The CHSP 400/150 model, featuring a 400-ton main ram and a 150-ton blank holder ram (cushion), is designed for deep drawing and forming applications requiring high tonnage. The frame is stress-relieved by vibration, ensuring long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-slide H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 slideway bearings - WPQR and WPS certified welding applications, approved by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 400/150 - Type: Steel construction, 8-slide H-frame press body - Frame Material: St52 – ERDEMİR - Slideway Bearings: Bronze Zr14 - Capacity (Ram): 400 Tons - Capacity (Cushion): 150 Tons - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 1000 mm - Stroke (Cushion): 350 mm - Min. Daylight Opening: 100 mm - Max. Daylight Opening: 1100 mm - Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS certified by TÜRK-AK accreditation; EN ISO 15614-1:2017 (Welding supervised by “welding coordination engineers” certified according to EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Fast Approach Speed (Moving Table): 150 mm/sec - Pressing Speed (Moving Table): 12 mm/sec - Return Speed (Moving Table): 170 mm/sec - Cushion Forward Speed: 30 mm/sec - Main Cylinder Inner Diameter: Ø450 mm – Ck45 - Cushion Cylinder Inner Diameter: Ø280 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Height: 5600 mm - Approx. Width: 3250 mm - Approx. Depth: 2200 mm - Lower Table Height from Floor: 1400 mm - Pre-fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Panel Display: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approx. Weight: 24 Tons Hfodpfxjx N Uhhe Aniog Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 1.500 t, corsa: 1.000 mm, larghezza tavola: 1.500 mm, lunghezza del tavolo: 2.400 mm, forza di retrazione: 500 t, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHSP 1500/500 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Gib General Description The CRONOSSTECH CHSP series H-type hydraulic forming presses are engineered to provide maximum frame rigidity, precise parallelism, and long service life for deep drawing applications requiring very high tonnage and large bolster areas. Thanks to its 8-gib H-frame construction, ram and bolster movements are stable and precisely controlled throughout the pressing operation. The CHSP 1500/500 model, with a 1500-ton main ram and 500-ton cushion capacity, is designed for large-sized dies, deep drawing, and controlled forming operations. The stress-relieved welded steel frame offers high durability and reliability under heavy-duty industrial conditions. ⚙️ Standard Equipment • Welded steel construction, 8-gib H-frame body • Stress-relieved frame structure • Bronze Zr14 ram/gib guides • WPQR and WPS certified welding applications approved by TURKAK (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” DELTA touchscreen control panel • Adjustable ram and cushion stroke control • Adjustable ram and cushion tonnage (pressure) control • Automatic lubrication system • Electronic filter contamination monitoring • Real-time display of hydraulic unit oil temperature and system status • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER switching components • Industrial-grade safety systems for operator protection 📐 Technical Specifications – CHSP 1500/500 Type: Welded steel construction, 8-gib H-frame body Frame Material: St52 – ERDEMIR Guide Material: Bronze Zr14 Capacity (Ram / Cushion): 1500 / 500 Ton Moving / Fixed Bolster: 1500 × 2400 mm Parallelism / Squareness: 120 / 60 micron/meter Stroke (Ram / Cushion): 1000 / 350 mm Daylight Opening (Min / Max): 200 / 1200 mm Max. Working Pressure: 250 Bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Hedpfx Ajx N Ukisniefg Main Cylinders: Ø620 mm – Ck45 (2 units) Cushion Cylinders: Ø360 mm – Ck45 (2 units) Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 87 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 150 t, corsa: 600 mm, larghezza tavola: 800 mm, lunghezza del tavolo: 800 mm, distanza tra le colonne: 800 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH 150/50 TON FOUR-COLUMN HYDRAULIC DRAWING PRESS General Description The CRONOSSTECH 150/50 ton four-column hydraulic drawing press is an industrial press solution developed for metal drawing, deep drawing, and precision pressing applications, featuring a rigid four-column frame structure. The St52-grade steel construction frame undergoes a stress-relief process using vibration method, ensuring high parallelism and perpendicularity tolerances even during long-term operation. The ram and cushion systems operate independently; stroke and pressure settings can be precisely adjusted via the touch panel. With REXROTH or PARKER hydraulic components, IE3 class motor, and a PLC-controlled system, the press delivers high efficiency, reliability, and long service life. Thanks to the automatic lubrication system and electronic filter contamination alerts, maintenance requirements are minimized. With its 150/50 ton capacity, this model offers an ideal solution for mass production, die testing, and medium to high tonnage deep drawing applications. Key Advantages - Rigid four-column press frame - Independent stroke and tonnage adjustment for ram and cushion - Full control via touch panel - High precision and repeatability - Low maintenance cost and long lifespan Fields of Application - Metal spinning/drawing operations - Deep drawing applications - Die testing and production processes - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs. induction-hardened, chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 150 Ton CAPACITY (CUSHION): 50 Ton DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 600 mm STROKE (CUSHION): 200 mm MIN. CLEAR OPENING: 100 mm MAX. CLEAR OPENING: 700 mm WELDING STRESS RELIEF: Stress relieved by vibration WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 18.5 kW – IE3 MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT SPEED: 150 mm/s MOVABLE TABLE DRAWING SPEED: 12 mm/s MOVABLE TABLE RETURN SPEED: 170 mm/s CUSHION TABLE ADVANCE SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 280 mm – Ck45 CUSHION CYLINDER BORE: Ø 160 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROX. PRESS HEIGHT: 3800 mm Hfedpfox N Ul Tox Aniog APPROX. PRESS WIDTH: 1150 mm APPROX. PRESS DEPTH: 1150 mm HEIGHT OF LOWER TABLE FROM FLOOR: 1200 mm PRE-FILL VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable via screen) RAM / CUSHION STROKE AND TONNAGE SETTING: Adjustable via screen SYSTEM & PRESS STATUS INFORMATION: Viewable from screen DIE MEMORY: Configurable via screen LINEAR POSITION SENSOR: NOVATECHNIK or TURCK PLC SYSTEM: DELTA TOUCH PANEL: DELTA 7” CONTROL COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 9 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Condizione: nuovo, Anno di produzione: 2026, potenza: 18,5 kW (25,15 CV), forza di pressatura: 150 t, corsa: 700 mm, larghezza tavola: 700 mm, lunghezza del tavolo: 1.000 mm, profondità della gola: 350 mm, Equipaggiamento: Marcatura CE, barriera di sicurezza a luce, documentazione / manuale, 150 Ton C-Frame Hydraulic Press – CHCP 150 – New / 24 Months Warranty Hydraulic presses are industrial machines that provide high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CHCP 150 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, is engineered for heavy industry and continuous production applications, featuring a high tonnage capacity, reinforced frame structure, and precise operating performance. Key Advantages: - High-strength, vibration-free steel frame construction - High precision (≤120 microns/meter) - User-friendly PLC-controlled system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Heavy-duty design suitable for industrial use - Long service life and low maintenance costs Application Areas: - Heavy-duty metal forming - Deep drawing and forming operations - Die pressing applications - Cutting and punching operations - Automotive and subsidiary industries Standard Features: - Stress-relieved steel frame construction by vibration method - PLC control with touchscreen panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerances in accordance with ISO & DIN standards (≤ 120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Two-hand control system - Cooling system Technical Specifications – CHCP 150 Press Force: 150 Ton Stroke: 700 mm Throat Depth: 350 mm Table–Ram Distance: 800 mm Table Size: 700 x 1000 mm Press Depth: 1400 mm Press Width: 700 mm Table Height from Floor: 950 mm Overall Height: 2800 mm Main Cylinder Diameter: Ø250 mm Motor Power: 18.5 kW Weight: 10,500 kg General Information Production Location: Turkey Warranty: 24 Months Hfsdpfsyzb D Hox Anieg Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 2.500 t, corsa: 1.000 mm, larghezza tavola: 1.800 mm, lunghezza del tavolo: 2.600 mm, forza di retrazione: 800 t, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHSP 2500/800 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Gib General Description The CRONOSSTECH CHSP series H-type hydraulic forming presses are developed for heavy-duty deep drawing applications that require very high tonnage, large table dimensions, and precise blank holder force. The 8-gib H-frame design ensures high rigidity throughout the pressing process, maintaining parallelism and perpendicularity tolerances over the entire stroke length for both the ram and table movements. The CHSP 2500/800 model offers maximum stability, controlled material flow, and repeatable production performance for large and deep drawing tools with its 2500-ton main ram and 800-ton blank holder capacity. The welded steel frame, stress-relieved by vibration, is engineered for reliable and long-lasting use under heavy industrial conditions. ⚙️ Standard Equipment • Welded steel frame, 8-gib H-frame press body • Stress-relieved frame via vibration • Bronze Zr14 gib liners • WPQR and WPS approved welding applications with TURK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touchscreen panel interface (DELTA 7”) • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination warning • Real-time monitoring of hydraulic oil temperature and system status on display • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER electrical components • Heavy-duty industrial safety systems 📐 Technical Specifications – CHSP 2500/800 Type: Welded steel construction, 8-gib H-frame press Frame Material: St52 – ERDEMIR Gib Liners: Bronze Zr14 Capacity (Ram / Blank Holder): 2500 / 800 Tons Moving / Fixed Table: 1800 × 2600 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight (Min / Max): 200 / 1200 mm Hodpfx Anex N Uk Ajiefg Max. Working Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Main Cylinder: Ø565 mm – Ck45 (4 units) Blank Holder Cylinder: Ø450 mm – Ck45 (2 units) Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 132 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 1.000 t, corsa: 1.000 mm, larghezza tavola: 1.500 mm, lunghezza del tavolo: 2.000 mm, forza di retrazione: 350 t, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHSP 1000/350 H-Type Hydraulic Deep Drawing (Stamping) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting (ram + blank holder) system architecture for high-tonnage sheet metal forming, deep drawing, and stamping operations. The 8-slide H-frame design provides high rigidity during the pressing process, maintaining stable parallelism and perpendicularity tolerances even with large table dimensions. The CHSP 1000/350 model, offering 1000-ton main ram and 350-ton blank holder capacity, is specifically designed for deep drawing processes requiring controlled material flow, particularly in the automotive, white goods, defense, and heavy industry sectors. The vibration-stress-relieved steel frame ensures long-lasting and reliable operation. ⚙️ Standard Equipment • Steel construction, 8-slide H-frame press body • Vibration stress-relieved body structure • Bronze Zr14 slide bearings • WPQR and WPS certified welding, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touchscreen panel (DELTA 7”) • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electrically monitored filter contamination warning • Monitoring of oil temperature and system status of the hydraulic unit on screen • Off-line filtration and cooling system • SIEMENS – SCHNEIDER switchgear • Safety systems for operator protection 📐 Technical Specifications – CHSP 1000/350 Type: Steel construction, 8-slide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 1000 Tons Capacity (Blank Holder): 350 Tons Moving / Fixed Table: 1500 × 2000 mm Parallelism / Perpendicularity: 120 / 60 micron/m Stroke (Ram / Blank Holder): 1000 / 350 mm Hfedpfx Aox N Uilsnieg Daylight (Min / Max): 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø500 mm – Ck45 (2 units) Blank Holder Cylinder: Ø370 mm – Ck45 Pre-Fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 65 Tons Manufacturing Note This machine is manufactured by CRONOSSTECH in Turkey.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 500 t, corsa: 1.000 mm, larghezza tavola: 1.200 mm, lunghezza del tavolo: 1.500 mm, forza di retrazione: 175 t, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHSP 500/175 H-Type Hydraulic Deep Drawing (Drawing) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and drawing operations. Thanks to its 8-guided H-frame construction, maximum rigidity is achieved during the pressing process, and parallelism and perpendicularity tolerances are reliably maintained throughout the long stroke. The CHSP 500/175 model, featuring a 500-ton main ram and a 175-ton lower cushion ram (pot), is designed to provide full control over the die and part in high-tonnage deep drawing and drawing operations. The frame construction is stress-relieved using vibration methods, aiming for a long service life and reliable operation. ⚙️ Standard Equipment - Welded steel construction, 8-guided H-frame press body - Stress-relieved frame structure by vibration - Bronze Zr14 slideways - Welding processes approved by WPQR and WPS with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” touchscreen operator panel (DELTA) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control Hfedpfxox N Uhuj Anijg - Automatic lubrication system - Electronic filter contamination warning - Hydraulic pack oil temperature and system status monitoring on display - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 500/175 Type: Welded steel construction, 8-guided H-frame press Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram): 500 Ton Capacity (Cushion): 175 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 1000 mm Cushion Stroke: 350 mm Minimum Daylight: 100 mm Maximum Daylight: 1100 mm Stress Relief: Vibratory stress relieving Welding Process: WPQR and WPS approved by TÜRK-AK/EN ISO 15614-1:2017 (Welds supervised by certified “welding coordination engineers” per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 45 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Cushion Table Advance Speed: 30 mm/sec Main Cylinder Bore: Ø500 mm – Ck45 Cushion Cylinder Bore: Ø300 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 5800 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1400 mm Pre-Fill Valve: NG 150 Hydraulic Pack: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC System: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 26 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 250 t, corsa: 800 mm, larghezza tavola: 1.200 mm, lunghezza del tavolo: 1.500 mm, forza di retrazione: 80 t, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHSP 250/80 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided Sliders Hfedpjx N Uaqofx Anieg General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow during sheet metal forming, deep drawing, and forming operations. The 8-guided H-frame structure provides maximum rigidity throughout the pressing process; parallelism and perpendicularity tolerances are maintained consistently along the entire stroke. The CHSP 250/80 model, with a 250-ton main ram and an 80-ton blank holder (pot) capacity, is designed for medium-to-high tonnage deep drawing and forming applications. The frame construction is stress-relieved using vibration methods, ensuring long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body type - Frame structure stress relieved by vibration - Bronze Zr14 slide bearings - WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7" DELTA touch panel interface - Adjustable ram and pot stroke control - Adjustable ram and pot tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - Real-time monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHSP 250/80 - Type: Steel construction, 8-guided H-frame press body - Frame Material: St52 – ERDEMİR sourced - Slide Bearings: Bronze Zr14 - Capacity (Ram): 250 Tons - Capacity (Pot): 80 Tons - Moving Table Dimensions: 1200 × 1500 mm - Fixed Table Dimensions: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Stroke (Pot): 300 mm - Min. Die Space: 100 mm - Max. Die Space: 900 mm - Stress Relief: Vibratory method - Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Welding operations are supervised by “welding coordination engineers” certified according to EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Moving Table Rapid Descent Rate: 150 mm/s - Moving Table Drawing Rate: 12 mm/s - Moving Table Return Rate: 170 mm/s - Pot Table Forward Speed: 30 mm/s - Main Cylinder Internal Diameter: Ø360 mm – Ck45 - Pot Cylinder Internal Diameter: Ø200 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 4200 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2200 mm - Lower Table Height from Floor: 1350 mm - Pre-fill Valve: NG 125 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Distance Gauge: NOVATECHNIK or TURCK - PLC System: DELTA - Touch Screen Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 18 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 150 t, corsa: 500 mm, larghezza tavola: 800 mm, lunghezza del tavolo: 1.000 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHP 150 H Frame Single Acting Hydraulic Press – 8 Guides General Description The CRONOSSTECH CHP series H-frame single acting hydraulic presses are industrial machines with rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to its 8-guide H-frame body design, it provides stable, balanced, and repeatable operation during pressing. The CHP 150 model is developed for medium-tonnage applications with a focus on reliable performance and long service life. CHP Series – Structural Features CHP series presses are engineered with heavy-duty operations in mind. The frame and carrier parts are stress-relieved by vibration. Bronze Zr14 slide bearings ensure smooth load transfer and long-term stable operation. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Stress-relieved frame and carrier parts via vibration - Bronze Zr14 slide bearings - Welding applications with WPQR & WPS approvals accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitoring on display - Cooling system - Off-line filtration - Two-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 150 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Guide Bearings: Bronze Zr14 Capacity (Ram): 150 Ton Moving Table Size: 800 × 1000 mm Fixed Table Size: 800 × 1000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 500 mm Min. Opening: 100 mm Max. Opening: 600 mm Stress Relief: Vibration stress relief Welding Application: Welding applications certified to EN ISO 15614-1/2017, accredited by TÜRK-AK (supervised by welding coordination engineers certified to EN ISO 14731) Hedpjx N T Dzofx Anijfg Max Operating Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Descent Speed: 150 mm/s Moving Table Pressing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø280 mm – Ck45 Approximate Press Height: 3650 mm Approximate Press Width: 2950 mm Approximate Press Depth: 2000 mm Height of Lower Table from Floor: 1250 mm Main Filling Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switching Components: SIEMENS – SCHNEIDER Approximate Weight: 7 Ton Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 150 t, corsa: 200 mm, larghezza tavola: 900 mm, lunghezza del tavolo: 1.800 mm, durata della garanzia: 24 mesi, Equipaggiamento: barriera di sicurezza a luce, An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism, predominantly used in cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process reliability, especially in wide bolster and heavy die applications, thanks to their rigid frame construction. The CRONOSSTECH H-Type Eccentric Press 150 Ton is designed for stable performance in high-volume production, prioritizing die protection and operator safety. Its mono-block frame, 8-point guided slide system, hydraulic overload safety, and automatic lubrication infrastructure ensure reliable performance under continuous production conditions. Key Advantages - Stable operation with large dies thanks to wide bolster dimensions - Die/equipment protection with hydraulic overload safety device - Precise guidance via 8-point guided slide and counterbalance piston - User-friendly operation with PLC and touchscreen interface - Enhanced operator safety with light curtain safety guard Application Areas Hsdsx N Ru Djpfx Aniefg - Punching/cutting/forming applications requiring large bolster dimensions - Mass production with automated feeding lines - Heavy die and high-tonnage manufacturing processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch-brake • Additional T-slotted bolster plate • 8-point guided slide • Adjustable stroke on single connecting rod • Counterbalance piston on slide • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse mode • Hydraulic overload safety device • Motorized slide adjustment mechanism • Light curtain safety guard • Enclosed geared oil reservoir • Dual-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems • Sliding safety cover in front of the bolster • Custom-designed dies per request ✅ TECHNICAL SPECIFICATIONS (H TYPE – 150 TON) • Capacity: 150 Ton • Usable lower bolster area: 900×1800 mm • Usable upper bolster area: 900×1800 mm • Stroke length (fixed): 200 mm • Nominal material thickness: 7 mm • Strokes per minute (SPM): 60 • Maximum closed die height: 500 mm • Minimum closed die height: 380 mm • Adjustment (slide adjustment): 120 mm • Number of connecting rods: 2 • Number of eccentric shafts (cranks): 2 • Safety fuse: Hydraulic • Switchgear components: Siemens – Schneider • Lubrication system: Automatic • Display / PLC / Inverter: Siemens – Pilz • Safety barrier: Leuze • Working mode: 4-position • Die memory capacity: 99 sets • Installation type: Floor mounted • Frame type: Mono-block • Motor power: 22 kW • Motor speed (RPM): 1450 • Approx. dimensions (L×W×D): 4500×3000×2000 mm • Approx. weight: 20 Tons Note: Please inform us if you require any changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Condizione: nuovo, Anno di produzione: 2025, potenza: 15 kW (20,39 CV), forza di pressatura: 160 t, larghezza tavola: 920 mm, lunghezza del tavolo: 660 mm, profondità della gola: 320 mm, forza di punzonatura: 160 t, alesaggio del cilindro: 55 mm, durata della garanzia: 24 mesi, Equipaggiamento: barriera di sicurezza a luce, La pressa eccentrica è un tipo di pressa meccanica azionata da una forza generata tramite un meccanismo eccentrico, impiegata in lavorazioni a freddo come tranciatura, taglio e formatura con stampo. Grazie all’elevata velocità produttiva e alla ripetibilità, rappresenta una soluzione efficiente e affidabile per linee di produzione di massa. La pressa eccentrica a C CRONOSSTECH da 150 ton è progettata per un funzionamento stabile nelle applicazioni di formatura a freddo. Il suo telaio in acciaio rigido, il sistema di frizione-freno pneumatico e l’infrastruttura di sicurezza conforme CE garantiscono prestazioni affidabili e adatte alla produzione in serie. Vantaggi principali • Prestazioni di corsa stabili e alta ripetibilità nella produzione di serie • Design focalizzato sulla sicurezza dell’operatore (barriera fotoelettrica + sistemi di sicurezza) • Necessità di manutenzione ridotta grazie alla lubrificazione automatica centralizzata • Pronta all’uso con controllo PLC + doppio comando manuale/pedale Campi di utilizzo • Operazioni di taglio e tranciatura a freddo • Applicazioni di rottura a freddo • Formatura di metallo con stampo • Linee di produzione a elevati volumi ✅ CARATTERISTICHE STANDARD • Telaio in acciaio saldato • Guida a quattro superfici • Biella e boccole in ghisa sferoidale • Albero principale e alberi di trasmissione in acciaio bonificato 4140 • Lubrificazione centralizzata completamente automatica con grasso • Combinazione di frizione e freno pneumatico • Conforme alle direttive di sicurezza CE Hjdovtywdspfx Anisfg • Valvola di sicurezza a doppio solenoide • Corsa regolabile manualmente • Sistema di protezione dita-mano con barriera fotoelettrica • Sistema di controllo PLC • Comando bimanuale/pedale • Sistema di blocco meccanico • Movimento inverso motore per emergenze • Conforme al regolamento sulla sicurezza sul lavoro • Conforme agli standard CE ✅ CARATTERISTICHE OPZIONALI • Tamponi antivibranti • Schermo LCD touch screen (standard per modelli 150–300 ton) • Sistema di sicurezza idraulico (standard per modelli 200–300 ton) • Piano di lavoro di ricambio • Svolgitore, alimentatore e raddrizzatore • Un set di stampi secondo le specifiche richieste • Slitta su 8 guide ✅ DATI TECNICI (150 TON) Capacità: 150 ton Profondità gola: 320 mm Distanza tavola–slitta: 500 mm Distanza tra slitta e tavola: 540 mm Distanza tra le pareti: 500 mm Regolazione slitta: 120 mm Larghezza pressa (circa): 1600 mm Profondità pressa (circa): 2280 mm Altezza pressa (circa): 2750 mm Dimensioni ancoraggio anteriore: 840 mm Dimensioni ancoraggio laterale: 1300 mm Diametro foro tavola: Ø220 mm Dimensioni tavola: 660×920 mm Diametro sede stampo: Ø55 mm Dimensioni slitta: 600×290 mm Altezza tavola da terra: 805 mm Regolazione corsa: 10–125 mm Colpi al minuto: 42 cpm Potenza motore: 15 kW Velocità motore: 1450 rpm Peso approssimativo: 7100 kg Nota: in caso di richieste di modifiche tecniche, vi preghiamo di contattarci. ✅ NOTA DI PRODUZIONE/FORNITURA Questa macchina è prodotta da CRONOSSTECH in Turchia. Vendita, messa in servizio e assistenza post-vendita sono gestite da CRONOSSTECH.

Condizione: pronta per il funzionamento (usata), I vostri referenti nella nostra azienda: Sig.: Andre Evering Sig.: Mario Klöver Sig.: Falk Deutsch Sig.: Simon Blank Vi offriamo qui un profilo CS Sigma usato in vendita. Il prezzo indicato si riferisce ad un prezzo per pezzo. Incluso nella consegna è: 01x profilo CS Sigma usato colore materiale: bianco panna lunghezza del profilo: ca. 2.200 mm Profilo CS dim.: ca. 150 x 50 x 15 mm spessore del materiale: ca. 2,25 mm peso / pz.: ca. 10.500 kg I profili CS Sigma possono essere piegati, o mostrare lievi danni o lievemente danneggiato o arrugginito. I nostri servizi in sintesi: (prezzi su richiesta) Montaggio, montaggio Hedpfx Anjgfbyzoiofg le nostre condizioni generali di montaggio devono essere rispettate Ispezione del rack Ispezione del rack secondo la norma DIN EN 15635 eseguita secondo la requisiti della BGR 234 Ispezione visiva per tutti i sistemi di scaffalature Consegna con il nostro parco veicoli (senza scarico)

Condizione: pronta per il funzionamento (usata), I vostri referenti nella nostra azienda: Sig.: Andre Evering Sig.: Mario Klöver Sig.: Falk Deutsch Sig.: Simon Blank Vi offriamo qui un profilo CS Sigma usato in vendita. Il prezzo indicato si riferisce ad un prezzo per pezzo. Incluso nella consegna è: 01x profilo CS Sigma usato colore materiale: bianco panna lunghezza del profilo: ca. 2.000 mm Profilo CS dim.: ca. 150 x 50 x 15 mm spessore del materiale: ca. 2,25 mm peso / pz.: ca. 10.000 kg I profili CS Sigma possono essere piegati, o avere lievi danni o ruggine Hfsdpjgfbytsfx Anieg lievemente danneggiato o arrugginito. I nostri servizi in sintesi: (prezzi su richiesta) Montaggio, montaggio le nostre condizioni generali di montaggio devono essere rispettate Ispezione del rack Ispezione del rack secondo la norma DIN EN 15635 eseguita secondo la requisiti della BGR 234 Ispezione visiva per tutti i sistemi di scaffalature Consegna con il nostro parco veicoli (senza scarico)

Condizione: buona (usata), Dati tecnici della traversa per scaffalatura portapallet: Hjdpfxow Eu Dnj Anisfg Sistema di scaffalatura: Bito Tipo: PRO La fornitura comprende: 01x traversa per scaffalatura portapallet, usata Colore materiale: blu Tipo traversa: PT150S Profilo scatolato: 150 x 50 mm Gancio: 5 HK (ganci) Luce libera: 3.600 mm Portata massima per coppia di traverse: 4.000 kg, con carico uniformemente distribuito 02x spine di sicurezza, usate Esecuzione: completamente zincata Per la sicurezza delle travi longitudinali contro il sollevamento accidentale I vostri referenti nella nostra azienda: Sig. Andre Evering Sig. Mario Klöver Sig. Falk Deutsch Informazioni generali sull’articolo: Questo articolo è offerto solo per il ritiro in sede. Eventuali richieste di trasporto o spedizione comportano costi aggiuntivi, che possono essere richiesti separatamente in base alla destinazione o quantità.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 150 t, larghezza tavola: 720 mm, lunghezza del tavolo: 1.000 mm, foro passante nel tavolo: 220 mm, regolazione del cilindro: 120 mm, regolazione della corsa: 125 mm, Equipaggiamento: barriera di sicurezza a luce, LUOGO DI PRODUZIONE: Turchia PERIODO DI GARANZIA: 24 MESI TEMPI DI CONSEGNA: IMMEDIATAMENTE DA MAGAZZINO CARATTERISTICHE GENERALI DELLE PRESSE ECCENTRICHE TIPO D o Corpo in acciaio, o Il corpo e le parti saldate saranno alleggeriti dalle vibrazioni. o   La tolleranza di parallelismo e perpendicolarità tra le tavole è conforme agli standard ISO e DIN. o   Frizione e freno combinati pneumatici – OMPI-Italia o 8 arieti con slitta o   Cilindro ammortizzatore Ram o Parti come il pistone, la biella, la ruota dentata a vite senza fine sono realizzate in fusione di acciaio, GS52 o Albero motore pieno ad alta resistenza – 4140 o   L'interno della biella sarà in bronzo, (Zr14) o Balza posteriore o   Con vassoio di scorta, o   Fusibile idraulico, o   Regolazione motorizzata del tavolo-pistone o Lubrificazione centralizzata automatica, o Pedale pneumatico con fermo e timer, comando a due mani, o   Con contatore elettrico, o   Applicazione PLC e touch screen -DELTA o   Quadri elettrici SIEMENS-SCHNEIDER Hfodpfevyrywex Anisg o   Domanda CE - FACOLTATIVA o   Barriere fotoelettriche di protezione delle dita, -SICK , LEUZE o   PLC di sicurezza (controlla l'intero sistema elettrico, valvola, raddoppiatore e pedale) - PILZ o   Valvola di sicurezza a doppia bobina – GPA , TOPAIR o Interruttore e pannello di posizione bloccati, o cuneo di sicurezza, o   Saranno presenti involucri protettivi nell'ambito della CE. CARROZZERIA MONOBLOCCO TIPO D Capacità 150 tonnellate Distanza tra tavolo e slittone 500 mm Distanza tra le pareti 1080 mm Regolazione del pistone 120 mm Larghezza approssimativa della pressa 1400 mm Profondità di pressatura approssimativa 1900 mm Altezza approssimativa della pressa 3000 mm Diametro foro tavolo 220 mm Dimensioni del tavolo 720 / 1000 mm Diametro della fessura di montaggio dello stampo 55 mm Dimensioni ariete 450/800 mm Dimensioni del tavolo da pavimento 900 mm Regolazione della corsa 10 / 125 mm Numero di colpi/minuto 50 unità/min. Potenza motore 15 + 0,75 KW Velocità del motore 1450 giri/min Peso approssimativo 12.000 Kg

Condizione: nuovo, Anno di produzione: 2025, tipo di controllo: Controllo NC, tipo di attuazione: idraulico, numero di rulli: 3, diametro rullo (superiore): 150 mm, diametro rullo laterale: 130 mm, larghezza di lavoro: 2.050 mm, spessore lamiera (max.): 6 mm, spessore lamiera acciaio (max.): 6 mm, Equipaggiamento: arresto di emergenza, comando a pedale, dispositivo di curvatura conica, documentazione / manuale, rulli temprati, rullo superiore orientabile, EQUIPAGGIAMENTO STANDARD Corpi principali in struttura d’acciaio Testa di apertura superiore idraulica Pannello di controllo mobile Rulli centrali motorizzati Rullo posteriore e inferiore a movimento su/giù idraulico Piegatura precisa con motore principale frenato Sistema di curvatura conica e pre-curvatura anteriore Trasmissione del rullo inferiore e superiore tramite riduttore planetario Sistema a sfere del rullo posteriore per facilitare lo scorrimento della lamiera Conformità alle direttive di sicurezza CE Rulli in acciaio forgiato ad alta resistenza, prodotti in acciaio certificato SAE 1050 (CK45) Alberi temprati Indicatori digitali (2 pezzi) Manuale d’uso DOTAZIONI OPZIONALI Gru superiore (ascensore) di supporto per grandi diametri di curvatura Supporti laterali idraulici per grandi diametri Rulli rettificati e lucidati Canaline per filo alle estremità degli alberi Unità di controllo NC Funzionamento a doppia velocità Regolazione della velocità continua Sistema di espulsione Opzione motore idraulico DATI TECNICI Lunghezza di curvatura: 2050 mm Pre-curvatura: 3/4 mm Curvatura: 4/6 mm Rullo superiore & inferiore: 150 mm Rullo laterale: 130 mm Ø min. di curvatura: 225 / 750 mm Potenza motore: 2,2 + 1,1 kW Velocità di piegatura: 6 m/min Capacità serbatoio: 25 l Lunghezza: 3800 mm Hjdpfxoxw D Udo Anijfg Larghezza: 950 mm Altezza: 1100 mm Peso: 2250 kg

Condizione: nuovo, Anno di produzione: 2025, potenza: 11 kW (14,96 CV), altezza di taglio (max): 1.500 mm, larghezza di taglio (max): 2.500 mm, durata della garanzia: 12 mesi, CARATTERISTICHE STANDARD - MORSA IDRAULICA DOPPIA MOBILE INDIPENDENTEMENTE - SISTEMA DI ATTERRAGGIO VELOCE LINEARE - CONTROLLO VARIABILE DELLA VELOCITÀ DELLA CORSIA - Controllo della velocità di discesa a TESTA VARIABILE - SISTEMA DI TENSIONAMENTO IDRAULICO DELLE STRISCE - SISTEMA DI SCORRIMENTO DEL TAVOLO - INTERRUTTORI DI SICUREZZA - TRASPORTATORE TRUCIOLI - SPAZZOLA MOTORIZZATA PER SEGA - 1 LAMA PER SEGA A NASTRO - 24 MESI GARANZIA MECCANICA 12 MESI GARANZIA ELETTRICA - PAESE DI ORIGINE Turchia SPECIFICHE TECNICHE CAPACITA' TONDA (MM) 1500 Hfsdovvcpzspfx Anisg CAPACITA' QUADRATO (MM) 1500X1500 CAPACITA' RETTANGOLARE (MM) 1500X2500 DIMENSIONE SEGA (MM) 80X1.6X15650 VELOCITÀ DELLA SEGA (M/MIN) 20 – 80 MOTORE PRINCIPALE (KW) 11 MOTORE IDRAULICO (KW) 2.2 POMPA ASSORBITORE (KW) 0,09 TENSIONE (V) 380 FREQUENZA (HZ) 50 ALTEZZA DI LAVORO (MM) 600 DIMENSIONI MACCHINA (MM) 7500X2150X3440 PESO (KG) 21000 PRODUCIAMO MODELLI CON TAGLIO ANGOLARE E DRITTO FINO A 220 MM - 3000 MM CONTATTACI PER MAGGIORI INFORMAZIONI

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 1.500 t, corsa: 1.000 mm, larghezza tavola: 1.500 mm, lunghezza del tavolo: 2.400 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHP 1500 H-Type Hydraulic Deep Drawing Press – 8 Guides General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are designed for deep drawing, forming, and heavy-duty shaping applications that require high tonnage. The 8-guide H-frame structure provides maximum rigidity and stability during pressing, helping to maintain parallelism and perpendicularity tolerances. The CHP 1500 model, with its large table dimensions, powerful hydraulic system, and high stroke capacity, offers a reliable solution for the automotive, defense, heavy metal forming, and industrial production lines. The frame structure is stress-relieved by vibration to ensure long life and stable operation. ⚙️ Standard Equipment - Steel construction, H-frame press body with 8 guides - Stress-relieved frame by vibration - Bronze Zr14 slide bearings - WPQR and WPS certified welding processes accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and production according to CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Display of hydraulic unit oil temperature and system status on screen Hsdpfxjx N T R Us Anisfg - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical switchgear components 📐 Technical Specifications – CHP 1500 - Type: Steel construction, H-frame press body with 8 guides - Frame Material: St52 – ERDEMİR - Slide Bearing: Bronze Zr14 - Capacity (Ram): 1,500 Ton - Movable Table Dimensions: 1,500 × 2,400 mm - Fixed Table Dimensions: 1,500 × 2,400 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 1,000 mm - Min. Daylight: 200 mm - Max. Daylight: 1,200 mm - Stress Relief: Vibration method - Welding Certification: Welding application certified to EN ISO 15614-1/2017, WPQR and WPS, accredited by TÜRK-AK - Max. Working Pressure: 250 Bar - Total Motor Power: 90 kW – IE3 - Main Pump: 101 cm³ – REXROTH or PARKER - Movable Table Fast Descent Speed: 150 mm/sec - Movable Table Drawing Speed: 12 mm/sec - Movable Table Return Speed: 170 mm/sec - Main Cylinder Bore: Ø620 mm – Ck45 (2 units) - Auxiliary Acceleration Cylinders: 2 units - Approximate Height of Press: 6,250 mm - Approximate Width of Press: 3,750 mm - Approximate Depth of Press: 2,500 mm - Lower Table Height from Floor: 1,500 mm - Pre-fill Valve: NG 200 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Measurement Scale: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Panel Display: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 70 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condizione: nuovo, Anno di produzione: 2025, Diametro tubo (max.): 60 mm, raggio di curvatura (max.): 200 mm, LUOGO DI PRODUZIONE: Turchia PERIODO DI GARANZIA: 12 MESI Hfjdsvn Euqjpfx Anijg Capacità tubo acciaio 60 x 3 mm Il semplice controllo one-touch consente a qualsiasi operatore di programmare e salvare automaticamente l'angolo di piega Singola velocità di piegatura Avviare il ciclo di piegatura dal pannello di controllo o dal pedale integrato È progettato su un armadio facilmente trasportabile con ruote e maniglie.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 2.000 t, corsa: 1.000 mm, larghezza tavola: 1.500 mm, lunghezza del tavolo: 2.500 mm, forza di retrazione: 600 t, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHSP 2000/600 H-Type Hydraulic Deep Drawing Press (with 8 Slides) General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed for heavy-duty deep drawing applications requiring very high tonnage, large table dimensions, and controlled blank holder force. Thanks to the 8-slide H-frame design, ram and table movements are executed with high rigidity during the pressing operation, maintaining parallelism and perpendicularity tolerances consistently over the entire stroke. The CHSP 2000/600 model offers high control and repeatability for large molds and deep drawing or forming operations, with 2000 tons main ram and 600 tons blank holder capacity. Its stress-relieved steel welded frame ensures long-lasting and reliable performance under heavy industrial conditions. ⚙️ Standard Equipment • Steel construction, 8-slide H-frame body • Stress-relieved frame by vibration • Bronze Zr14 slide bearings • WPQR and WPS certified welding process approved by TURK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” DELTA touchscreen control panel • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination alarm • Monitoring of hydraulic oil temperature and system status via panel • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER switchgear components • Industrial safety systems for operator protection 📐 Technical Specifications – CHSP 2000/600 Type: Steel construction, 8-slide H-frame body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram / Blank Holder): 2000 / 600 Tons Movable / Fixed Table: 1500 × 2500 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight (Min / Max): 200 / 1200 mm Max. Working Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Hodpjx N Ukvjfx Anisfg Main Pump: 140 cm³ – REXROTH or PARKER Main Cylinder: Ø720 mm – Ck45 (2 pcs) Blank Holder Cylinder: Ø390 mm – Ck45 (2 pcs) Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 105 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 1.200 t, corsa: 1.000 mm, larghezza tavola: 1.500 mm, lunghezza del tavolo: 2.000 mm, forza di retrazione: 400 t, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHSP 1200/400 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Gibbed General Description The CRONOSSTECH CHSP series H-type hydraulic forming and deep drawing presses are designed to provide maximum rigidity, precision, and process control for sheet metal forming applications requiring high tonnage. The 8-gib H-frame body structure ensures stable maintenance of parallelism and perpendicularity tolerances, even with large table dimensions. The CHSP 1200/400 model, with a 1200-ton main ram and a 400-ton cushion capacity, is suitable for heavy industry applications that require deep drawing, forming, and controlled material flow. The vibration stress-relieved steel structure ensures long service life and reliable operating performance. ⚙️ Standard Equipment • Steel construction, 8-gib H-frame press body • Vibration stress-relieved frame • Bronze Zr14 slide bearings • WPQR and WPS certified welding applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) Hedpfx Ajx N Uirjniofg • PLC-controlled hydraulic system • Touchscreen panel (DELTA 7”) • Adjustable ram and cushion stroke control • Adjustable ram and cushion tonnage (pressure) control • Automatic lubrication system • Electronically controlled filter contamination warning • On-screen monitoring of hydraulic unit oil temperature and system status • Offline filtration and industrial cooling system • SIEMENS – SCHNEIDER switchgear components • Industrial safety equipment for operator protection 📐 Technical Specifications – CHSP 1200/400 Type: Steel construction, 8-gib H-frame press body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 1200 Ton Capacity (Cushion): 400 Ton Moving / Fixed Table: 1500 × 2000 mm Parallelism / Perpendicularity: 120 / 60 micron/m Stroke (Ram / Cushion): 1000 / 350 mm Daylight (Min / Max): 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø560 mm – Ck45 (2 units) Cushion Cylinder: Ø450 mm – Ck45 Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 75 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 800 t, corsa: 1.000 mm, larghezza tavola: 1.500 mm, lunghezza del tavolo: 2.000 mm, forza di retrazione: 270 t, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHSP 800/270 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Sliders General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting (ram + blankholder) operating principle for high-tonnage sheet metal forming, deep drawing, and spinning applications. The 8-slider H-frame structure ensures high rigidity, stable parallelism, and long die life during pressing operations, even with large table dimensions. The CHSP 800/270 model, with its 800-ton main ram and 270-ton blankholder capacity, has been developed especially for processes requiring controlled material flow in the automotive, white goods, defense industry, and heavy sheet metal forming applications. The stress-relieved steel construction body provides long-lasting and reliable operation. ⚙️ Standard Equipment • Steel construction, 8-slider H-frame press body type • Stress-relieved body structure via vibration • Bronze Zr14 slide bearing • WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • PLC controlled hydraulic system • Touch screen panel (DELTA 7”) • Adjustable ram and blankholder stroke control • Adjustable ram and blankholder tonnage (pressure) control • Automatic lubrication system • Electronically controlled filter contamination warning • On-screen monitoring of hydraulic unit oil temperature and system status • Off-line filtration and cooling system • SIEMENS – SCHNEIDER switching components Hfsdpfx Anex N Uh Usisg • Safety systems for operator protection 📐 Technical Specifications – CHSP 800/270 Type: Steel construction, 8-slider H-frame press body type Body Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 800 Ton Capacity (Blankholder): 270 Ton Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Stroke (Blankholder): 350 mm Min. / Max. Daylight: 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø390 mm – Ck45 (2 pcs) Blankholder Cylinder: Ø370 mm – Ck45 Pre-fill Valve: NG 200 PLC: DELTA Touch Panel: DELTA 7” Approx. Weight: 54 Ton Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 600 t, corsa: 1.000 mm, larghezza tavola: 1.200 mm, lunghezza del tavolo: 1.500 mm, forza di retrazione: 200 t, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHSP 600/200 H-Type Hydraulic Deep Drawing (Sheet Metal Forming) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to provide controlled material flow in sheet metal forming, deep drawing, and drawing applications. Thanks to the 8-guided, H-frame body structure, maximum rigidity is ensured during pressing; parallelism and perpendicularity tolerances remain stabile throughout the long stroke. The CHSP 600/200 model features a 600-ton main ram and a 200-ton lower blank holder (pot) capacity, providing precise control over the die and workpiece during high-tonnage deep drawing and forming operations. The frame construction is stress-relieved by vibration to ensure long-term, reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 slide bearings - TURK-AK-accredited WPQR and WPS certified welding applications (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing according to CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram and pot stroke control - Adjustable ram and pot tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - On-screen display of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switching materials 📐 Technical Specifications – CHSP 600/200 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMIR Slide Bearings: Bronze Zr14 Capacity (Ram): 600 Ton Capacity (Pot): 200 Ton Movable Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 1000 mm Pot Stroke: 350 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Weld Stress Relief: Vibration stress relief Welding Application: WPQR and WPS certified by TURK-AK en ISO 15614-1/2017 (Welding operations supervised by certified “welding coordination engineers” according to EN ISO 14731) Max. Working Pressure: 250 Bar Hfsdpfxex N Uhzs Anijg Total Motor Power: 55 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Movable Table Fast Approach Speed: 150 mm/sec Movable Table Drawing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Pot Table Forward Speed: 30 mm/sec Main Cylinder Bore: Ø550 mm – Ck45 Pot Cylinder Bore: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 5900 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2300 mm Fixed Table Height from Floor: 1400 mm Pre-Fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Measurement Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switching Materials: SIEMENS – SCHNEIDER Approx. Weight: 35 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 300 t, corsa: 800 mm, larghezza tavola: 1.200 mm, lunghezza del tavolo: 1.500 mm, forza di retrazione: 100 t, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHSP 300/100 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Gibbed General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. Thanks to the 8-gibbed H frame construction, maximum rigidity is maintained throughout the pressing process; parallelism and perpendicularity tolerances over the long stroke are stably preserved. The CHSP 300/100 model, with a 300-ton main ram and 100-ton cushion (blankholder) capacity, is designed for deep drawing and spinning applications requiring high tonnage. The frame construction is stress-relieved by vibration to ensure long-term, reliable operation. ⚙️ Standard Equipment - Steel construction, 8-gibbed H-frame press body - Stress-relieved frame by vibration - Bronze Zr14 slide bushings - WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing conforming to CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically controlled filter contamination warning - Monitoring of hydraulic unit oil temperature and system status on the display - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 300/100 - Type: Steel construction, 8-gibbed H-frame press body - Frame Material: St52 – ERDEMİR Hfjdjx N Uhbspfx Aniog - Gib Bushings: Bronze Zr14 - Capacity (Ram): 300 tons - Capacity (Cushion): 100 tons - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 microns/m - Perpendicularity Tolerance: 60 microns/m - Stroke (Ram): 800 mm - Stroke (Cushion): 300 mm - Min. Daylight: 100 mm - Max. Daylight: 900 mm - Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS approved and accredited by TÜRK-AK EN ISO 15614-1/2017 (Welding applications are supervised by “welding coordination engineers” certified according to EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/s - Moving Table Spinning Speed: 12 mm/s - Moving Table Return Speed: 170 mm/s - Cushion Table Forward Speed: 30 mm/s - Main Cylinder Internal Diameter: Ø390 mm – Ck45 - Cushion Cylinder Internal Diameter: Ø230 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Height of Press: 4400 mm - Approx. Width of Press: 3250 mm - Approx. Depth of Press: 2200 mm - Bottom Table Height from Floor: 1350 mm - Pre-fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Panel Display: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 21 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.